Concepts and realization of microstructure heat exchangers for enhanced heat transfer

Microstructure heat exchangers have unique properties that make them useful for numerous scientific and industrial applications. The power transferred per unit volume is mainly a function of the distance between heat source and heat sink—the smaller this distance, the better the heat transfer. Another parameter governing for the heat transfer is the lateral characteristic dimension of the heat transfer structure; in the case of microchannels, this is the hydraulic diameter. Decreasing this characteristic dimension into the range of several 10s of micrometers leads to very high values for the heat transfer rate.

Another possible way of increasing the heat transfer rate of a heat exchanger is changing the flow regime. Microchannel devices usually operate within the laminar flow regime. By changing from microchannels to three dimensional structures, or to planar geometries with microcolumn arrays, a significant increase of the heat transfer rate can be achieved.

Microheat exchangers in the form of both microchannel devices (with different hydraulic diameters) and microcolumn array devices (with different microcolumn layouts) are presented and compared. Electrically heated microchannel devices are presented, and industrial applications are briefly described.     

蒙皂石含量与膨胀土膨胀势指标相关关系研究

对沿南水北调中线工程邯郸—永年、南阳、平顶山等地区及襄樊、荆门钟祥地区采集的各类地表、近地表膨胀土样品5 6件 ,运用现代XRD定量方法和有机染料吸附方法测量了粘土矿物成分和蒙皂石含量 ,同时测定了它们的液限、塑限、自由膨胀率、比表面积、粘粒、胶粒含量等指标。蒙皂石含量与各种膨胀势判别指标研究表明 ,蒙皂石含量是各种膨胀势的主要控制因素。当然 ,各种测量误差 (主要是蒙皂石含量的测量误差 )也是影响膨胀势判别的因素。Seed膨胀势较本文采用的推荐方案划分结果高 1～ 2个级次。蒙皂石含量与各参量之间呈线性、对数、指数关系 ,与粘土矿物的“诊断”吸收特性一起 ,这为膨胀土遥感提供了基础.     

Multiplicity Results for Periodic Solutions to Second-Order Difference Equations

By using the Z _p geometrical index theory, some sufficient conditions on the multiplicity results of periodic solutions to the second-order difference equations

磁悬浮飞轮转子组件温度场分析与研究

磁悬浮飞轮作为一种航天器的姿态控制执行机构当其工作在高真空环境下时，散热条件差，系统温度过高，导致转子组件热膨胀，产生热应力或改变磁轴承及电机的间隙，则会降低系统的可靠性。利用有限元软件ANSYS对一种磁悬浮飞轮系统的转子组件进行了温度场仿真，考虑了传导及辐射的传热方式，得到了飞轮转子组件的温度场分布，并且分析了组件材料属性对温度场分布的影响，最后对飞轮系统的强化传热进行了研究。分析所得温度值与实验测值相符，为磁悬浮飞轮系统的热设计及总体结构设计提供了重要依据。     

基于可靠度的结构优化的序列近似规划算法

基于可靠度的优化的最直观解法是把可靠度和优化的各自算法搭配一起形成嵌套两层次迭代。为改善其收敛性提高计算效率,人们提出了功能测度法、半无限规划法、单层次算法等多种改进方法。本文对传统结构优化界的经典序列近似规划法改造并扩展应用于求解基于可靠度的结构优化问题,构造该问题的序列近似规划模型和求解过程;其核心思想是在每个近似规划子问题中采用近似可靠度指标对设计变量的线性近似,在优化迭代过程中同步更新设计变量和随机空间中的近似验算点坐标,以达到可靠度分析和优化迭代同步收敛的目标。为了算法的实施,还推导出近似可靠度指标的半解析灵敏度计算公式,编制了程序,最终实现与通用软件的连接。论文用算例证实算法的有效性。     

光纤陀螺随机游走系数的分析研究

分析了产生随机游走误差的机理,分别采用有关标准和Allan方差进行了随机游走系数的分析和计算。结果表明:随机游走系数是衡量光纤陀螺噪声水平的重要指标,其值的大小体现了陀螺的极限精度。采用Allan方法表述光纤陀螺的静态指标,物理概念清晰,方法简便。     

BEWARE OF THE BEACH HIDDEN KILLER--RIP CURRENT

离岸流是垂直于海岸线、向外海方向快速移动的强劲海流。对于海边的人员来说非常危险,没有经验的游泳者一旦被离岸流带离浅滩,很难与之对抗游回岸边,往往因力竭而溺水。每年海滨区域都有大量的溺亡事件与此相关,但有关离岸流的知识在公众的视野里仍比较缺乏。本文从流体力学的角度对离岸流的危害、形成、特征以及分类进行了简要介绍,并在如何防范离岸流、保障自身安全等方面给出了一些建议。     

结构体系的非概率可靠性分析方法

结构体系的可靠性与结构的失效模式有关。在非概率条件下 ,结构体系的可靠性取决于非概率可靠性指标最小的最危险失效模式。最危险失效模式的识别及相应极限状态方程的建立是结构体系非概率可靠性计算的关键问题。文中考虑了结构参数及强度、外载荷等参量的不确定性 ,基于随机可靠性方法中常用的优化准则法 ,提出了非概率结构体系主要失效模式的枚举准则。可在只需枚举出少量主要失效模式的情况下 ,不漏掉最危险失效模式。并提出用区间增量载荷法生成主要失效模式的极限状态方程。算例分析表明文中方法是实用和有效的。     

Laser Doppler anemometry measurements of laminar flow in helical pipes

Three-dimensional laser Doppler anemometry measurements are performed on developed laminar flow in three helical pipes. The experimental observations are compared to results of numerical calculations employing the fully elliptic numerical method. Good agreement is found between measured data and numerical results. The three helical pipes, with curvature ratios of 0.0734 and 0.1374 and non-dimensional pitches of 0.0793 and 0.193, are adopted to study the effects of curvature and pitch on laminar flow in the experimental approach. The range of Reynolds numbers is 500–2000 to ensure laminar flow in the entire helical pipe. Both the profile shapes of the normal components of the secondary flow and those of the axial flow along the same centerline present not only similar patterns but also similar change when pitch, curvature ratio, and Reynolds number vary. The results demonstrate comprehensive relationships between the axial flow and the secondary flow.